Electrical Test & Measurement

Mini clamp meter AC current range 0-600A, accurate measurement AC/DC voltage range 0-600V, resistance range 0-2MΩ, digital mini clamp meter also has diode test, switch buzzer, data hold, automatic power off, overload protection function.

Digital mini-clamp multimeter is available for measuring AC current 0-600A, AC/DC voltage 0-600V, resistance 0-20MΩ, HD LCD with backlight, clear readings, clearly visible in dark environment, easy to use in labs factories and homes.

AC DC mini clamp meter measuring range 0-600A with true RMS, diode test, backlight and check light, capacitance 0-100mF, resistance 0-60MΩ, frequency 0-10MHz. this clamp meter is the ideal tool for solving industrial and household electrical problems.

A mini digital multimeter is a pocket-sized multimeter designed for home use, which has AC/DC voltage up to 600V, CAT Ⅲ 600V safety rating. The small digital multimeter with a large LED backlight which can work in poorly lit areas.

The mini opm optical power meter is controlled by a single chip microprocessor and full functioning, mainly used for the measurement of continuous optical signal power. It offers a measurement range of -70~+6, -70~+10, -50~+26 and a wavelength range of 800 to 1700 nm. Additionally, the built-in detector provides excellent protection.

High-performance multifunctional AC voltage tester with AC voltage NCV induction probe, with a high sensitivity of 48-1000V and low sensitivity of 12-1000V dual-mode adjustable voltage sensitivity detection range. The voltage tester pen is suitable for electricians and home users.

4-in-1 optical power meter features a color display and offers multiple functions, including optical power measurement, continuity testing, red light detection, and quality control. It supports wavelengths of 850/980/1310/1490/1550/1625 nm with an accuracy of ±0.3 dB. Compatible with FC, SC, and ST fiber optic interfaces.

The NCV digital multimeter adopts voltage segment measurement, and the minimum measurable voltage is about AC12V/50Hz, which can effectively sense and distinguish the neutral wire and the live wire. Non-contact voltage multimeter has a temperature measurement function that can be used for HVAC system testing.

Economical AC voltage tester pen featuring a 12V-1000V measuring voltage, 50/60 Hz frequency. The pen-type voltage tester detects voltage in a no-contact way, so do not worry about there could be any possibility of being shocked by the electricity.

Good non-contact AC voltage tester comes with a measuring voltage of high sensitivity of AC 12-1000V, low sensitivity of AC 48-1000V, 50/60 Hz frequency. The contactless AC voltage detector is ideal for breakpoint test which is handy circuit tester for electricians, homeowners.

Non contact phase rotation meter for sale online, available with voltage range 70V~1000V and 3xΦ10mm-Φ40mm large clamps. Digital phase rotation tester can detect the phase sequence by directly clamping three super-inductive high-insulation clamps to the insulation sheath of the three-phase live wire, fast, safe and convenient. Phase sequence meters are widely used in the power industry, electronic manufacturing, industrial control and other industries.

Phase tester is a non-contact phase rotation tester, which can detect the phase sequence by directly clamping three super-inductive high-insulation clamps to the insulation sheath of the three-phase live wire. The phase detector has a voltage range 70V~1000V, 3xΦ1.6mm-Φ16mm jaws, and live line inspection, open circuit search, breakpoint location, and line inspection functions, fast, safe and convenient, widely used in the power industry, electronic manufacturing, industrial control and other industries.

Non-contact high voltage tester has a wide range of voltage levels, 380V ~ 275kV, non-contact induction technology, without contact with the charged body, to ensure the safety of the operator. Non contact high voltage detector is the ideal choice for on-site high voltage inspection, identification of high voltage system voltage levels, inspection of high voltage line fault.

Non-contact high voltage detector with adjustable interface and insulation pole connection, operating quickly, power supply test range 380V ~ 500kV. High voltage detector has red LED and buzzer sound/light alarm, easy to identify, 9 voltage levels covering a variety of voltage levels, suitable for a variety of high voltage systems.

The 6000-bit true RMS pen-type multimeter can measure AC and DC voltages of 6-600V and capacitances of 60nF~600mF. The pen digital multimeter has a lightweight appearance, a flashlight at the end of the pen, and a special tip probe, which enables it to adapt to narrow, dim, and dense test environments.

Phase detector can measure phase in very low voltage lines and fully realize automatic phase detection from 10V to 500kV voltage, phase range 0°~360°, frequency range 45.0Hz~65.0Hz, phase distance up to 260m. Wireless phase tester uses a 3.5-inch true-color LCD screen, which can display phase, frequency, phase sequence and phase results on the same screen.

Buy a wireless phase detector online, used for ring main unit phase detection of the power distribution system, phase, frequency, and phase sequence test. The phase tester has a voltage range 1V~600V, 0°~360° phase range and 45.0Hz~65.0Hz frequency range. Fast, safe and convenient phase sequence detector is suitable for the power industry, electronic manufacturing, industrial control and other industries.

Phase sequence tester can perform phase testing in long-distance, short-distance, basement and mine, the timing accuracy is less than 20nS and receives GNSS signals of six satellite timing systems simultaneously. General distance 260 meters (in an open space), satellite distance 5000 meters, 10V~500kV voltage range. Digital phase detector adopts a 3.5-inch true-color LCD screen, which can display phase, frequency, phase sequence and test results on the same screen, voice prompt function makes the test more convenient.

The phase tester applys for power lines below 220kV or substations for electric inspection, phase verification, phase test, phase sequence judgment, electric inspection, etc. It provides a 220V~200kV voltage range, 0°~360° phase range, 45.0Hz~65.0Hz frequency range and 60m phase distance. The wireless phase detector with a USB interface can read historical data, and view, save, print test results.

The plug in digital watt meter is the perfect tool for monitoring the energy consumption of your devices, it is simple to use, has a clear and easy to read LCD display and provides instant feedback on the power consumption of any connected device.