Optical Level, 36X Magnification

Q1: What are the key features to consider when choosing an automatic level?
A1: Important features to consider include the magnification and aperture of the telescope, the accuracy and range of the instrument, the quality of the compensator mechanism, the durability and portability of the unit, and compatibility with accessories such as tripods and measuring rods.

Q2: How do I calibrate an automatic level?
A2: Automatic levels typically require periodic calibration to ensure accuracy. Calibration procedures may vary depending on the manufacturer and model of the instrument, but generally involve adjustments to the compensator mechanism and verification of the instrument's accuracy using known reference points or benchmarks.

Q3: Can automatic levels be used in low light conditions?
A3: Many automatic levels are equipped with built-in compensators that provide reliable performance even in low light conditions. However, for optimal results, it is recommended to use automatic levels in well-lit environments or to supplement with external lighting sources when necessary.

Tips: How accurate is optical level?

The accuracy of an optical level can vary depending on several factors, including the quality of the instrument, proper calibration, and the skill of the operator. However, in general, optical levels are capable of providing measurements with a high degree of precision.

A high-quality optical level can typically achieve accuracy within a few millimeters over a distance of several meters. For example, some models may have a leveling accuracy of ±2.0 mm per kilometer, meaning that for every kilometer of horizontal distance measured, the elevation difference between two points should not exceed 2.0 mm.

It's important to note that achieving this level of accuracy requires careful setup and operation of the instrument, as well as consideration of environmental factors such as temperature, humidity, and terrain conditions. Additionally, regular calibration and maintenance of the optical level are essential to ensure consistent and reliable performance.

Thank you for buying industrial test and measurement equipment on SISCO.com, all products sold by SISCO and the partner cover a 12 months warranty, effective from the date of receiving the products.

What is covered?

SISCO is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

• Product purchased from anyone other than a SISCO store or a SISCO authorized reseller.
• Expendable parts.
• Routine cleaning or normal cosmetic and mechanical wear.
• Damage from misuse, abuse or neglect.
• Damage from use of parts other than SISCO approved.
• Damage from use outside the product’s usage or storage parameters.
• Damage from use of parts not sold by SISCO.
• Damage from modification or incorporation into other products.
• Damage from repair or replacement of warranted parts by a service provider other than a SISCO authorized service provider.
• Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.