5 in 1 Digital Stud Finder for Wall/Metal/Wood

Structure

Q1: What is a stud finder?
A1: The stud finder is a handheld device used to locate the framing studs behind surfaces such as drywall or plaster. This tool is essential for ensuring that you anchor nails or screws into the structural supports of a wall, rather than just into the drywall, which can help support heavy objects and prevent damage.

Q2: How does a magnetic stud finder work?
A2: The magnetic stud finder works by using strong magnets to detect the metal fasteners (nails or screws) that attach drywall to the wooden studs behind it. Magnetic stud finders do not rely on batteries or electronic components, making them simple and reliable for detecting studs in walls. However, their effectiveness is limited to detecting metal fasteners, which might not always be precisely centered on the stud.

• Magnet Detection: The device contains a magnet that is attracted to the metal fasteners used in the construction of the wall.
• Scanning: As you move the magnetic stud finder across the wall, the magnet will be drawn toward and stick to the wall where a metal fastener is located.
• Indication: When the magnet is attracted to a fastener, it indicates the presence of a stud behind the drywall.

Q3: Can a stud finder detect live wires?
A3: Some advanced electronic stud finders can detect live electrical wires behind walls. Always refer to the product specifications to see if this feature is included, and use caution when drilling or cutting into walls.

Tips: How to use the 5 in 1 digital stud finder?

• Select Press the Power Button, and press the mode switch button.
• Calibration: Press the scan button, the signal bar disappears, and a beep is heard.
• Scan: Slow panning stud finder, LCD display will remind you of the direction and distance of the item.
• Mark: When the signal bar is full and you hear a continuous beep, you have found the center of the item.

Thank you for buying industrial test and measurement equipment on SISCO.com, all products sold by SISCO and the partner cover a 12 months warranty, effective from the date of receiving the products.

What is covered?

SISCO is responsible for providing free spare parts, and free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

• Product purchased from anyone other than a SISCO store or a SISCO authorized reseller.
• Expendable parts.
• Routine cleaning or normal cosmetic and mechanical wear.
• Damage from misuse, abuse or neglect.
• Damage from use of parts other than SISCO approved.
• Damage from use outside the product’s usage or storage parameters.
• Damage from use of parts not sold by SISCO.
• Damage from modification or incorporation into other products.
• Damage from repair or replacement of warranted parts by a service provider other than a SISCO authorized service provider.
• Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.